Electroid Clutch & Brake Custom Assembly ECA-26C EC-26B Mounted Pulley 12-24 VDC

Description

Description:
This assembly is comprised of two off the shelf Electroid Company products, the Clutch and the Brake, which is married to a support block with two mounting arms, and joined by a 1/2" shaft.
T
his is a new unit, purchased but never used from stock inventories, yet it is a custom assembly. See "Remarks" section.
Specifications:
Clutch: ECA-26C-8 - Custom
Shaft Size: .500" shaft, Keyed .062" x .125", Secured by two 10/32 Set Screws and Locking nuts
Rated Torque: 75 in-lbs
Respose Time: 42 msec
Life Cycle @ rated Torque: 3 Million
Maximum Speed: 7,500 rpms
Coil Resistance: 50 ohms
Rated Voltage:
12-24 Vdc
Rated Current: .280 amps
Brake: BEC-26B-8 - Custom
Shaft Size: .500" shaft, Keyed .062" x .125", Secured by two 10/32 Set Screws and Locking nuts
Rated Torque: 75 in-lbs
Respose Time: 40 msec
Life Cycle @ rated Torque: 3 Million
Maximum Speed: 7,500 rpms
Coil Resistance: 50 ohms
Rated Voltage: 12-24 Vdc
Rated Current: .280 amps
Frame: Custom -
Mounting Block with two mounting Arms -
Mounting Footprint; 4.250" across x 1.562 Down
Pulley: 14L100 - 14 Teeth, 1/2" Pitch, 1.000" Wide
Hub: Stainless Steel; 2.625" x .375" Hub mounting face, 3.187" Hub shoulder, six 60 degree set apart threaded hole placements.
Warranty:
Product comes with a 30 day warranty that guarantees the product to perform to the description provided.
Customer will have the option of either having the product replaced, or for money back.
All Warranted products have to be returned for inspection before any refunds are provided, unless other arrangements have been approved.
Warranty limits with sensitive Electronic Systems; Opening the unit voids the warranty, exposing the unit to water or other fluids voids the warranty, smashing the protective container
voids the warranty, electrical damage do to improper or modified harness wiring
voids the warranty, using the unit other than on it's OEM intended use
voids the warranty.
Returns:
Customer has the option of returning the product for what ever reason, within the 30 day window from purchase, but will have to pay all associated shipping costs (including the actual Outbound shipped cost, and Return Shipping) and a 25% Restocking fee (recovers Inventorying costs, Labor, and Packaging materials.
Return limits with sensitive Electronic Systems; Opening the unit voids the option to return, exposing the unit to water or other fluids voids the
option to return
, smashing the protective container
voids the
option to return
, electrical damage do to improper or modified harness wiring
voids the
option to return
, using the unit other than on it's OEM intended use on the designated models and years
voids the
option to return
.
Shipping:
Outbound Shipping is Free for this product.
Sorry, there is no shipping outside of the Continental US without prior shipping arrangements. Please contact me on shipping options and costs
before purchasing.
Return shipping is reimbursed if product is defective.
Other shipping options are available; just ask me for services and costs.
Remarks:
This is custom assembly that
was originally built for u
se on the Bell & Howell FIMA 2000 continuous Cutter system. It's construction was designed to operate a high speed Guillotine blade on a continuous duty cycle, thus making it a super automation component for your design. And since the construction is made up of two off the shelf components, you can utilize the assembly as is, or strip it down for your own custom application.